ContactPlease get in touch. We will be pleased to assist you.
+49 89 68004 - 0
(Mon. to Fri., 8:00 am to 5:00 pm)
Service & Repair
+49 89 68004 - 666
Mon. to Thurs., 8:00 am to 5:00 pm
Fri., 8:00 am to 4:00 pm
Questions concerning DEXICON: firstname.lastname@example.org
Questions concerning INTUS COM: email@example.com
Other questions: firstname.lastname@example.org
Our partnerPCS works with approximately 100 software and system house partners from all over the world. They offer security solutions based on INTUS products and addressing all areas of production data collection and security technology.
CareerWe are constantly looking for new, committed colleagues to strengthen our team.
Elegant and sophisticated.
The RFID access readers of the INTUS 700 family are distinguished by an elegant design aligned with the visual trend of the INTUS 5600 range. The common design element shared by all the readers is a bright blue central ring.
Each member of the family has a distinct character: classical with a full-glass front, extra slim for door frame installation, robust and rugged in a zinc die-cast housing, flush inside a front panel, optionally with or without a PIN keypad.
- RFID readers with sophisticated design.
- Optionally with PIN entry via touch.
- Tamper contact and tear-off detector.
- Special models for special applications.
With Touch and PIN.
The INTUS 700Touch equipped with a PIN keypad can be operated both via touch and RFID. The PIN keypad is permanently illuminated and clearly visible in the dark.
The INTUS 700 access reader keeps up the visual trend of the INTUS 5600 line and convinces in every aspect.
The INTUS 700slim reader is only 32 mm wide – perfect for narrow door frames or jambs. It is optionally available with a robust membrane keyboard. Three LEDs – blue, red and green – signal the status, while the blue ring indicates that the reader is ready.
The PIN keypad is backlit for easy operation in the dark. Optionally the reader is available with a resin-cast connection cable for outdoor use.
INTUS 700slim: awarded with the Design Plus Award 2020.
Robust and rugged.
The INTUS 700-Steel RFID reader will withstand many an act of vandalism in public places.
A rugged zinc die-cast housing combined with 2 mm thick IK09 Xensation glass will hold up even against a rather massive use of force. The device is available with or without a touch surface with illuminated PIN keypad.
RFID on metal.
The INTUS 700-Panel offers quite a lot for installation in metal environments and front-panel mounting: high-end glass design, a shock-resistant Xensation glass front – 2 mm thick with IK09 impact protection rating – as well as an optional touch surface with illuminated PIN keypad.
The INTUS 700 RFID readers are all multi-ISO readers with Mifare and Legic as the standard reading methods. As a contactless proximity identification system, they interface to all PCS Access Control Managers and terminals by PCS’s LBus. INTUS 700 is equipped with a tamper contact and tear-off detector.
- Technology: Mifare (Classic, DESFire EV1/2), Legic (prime, advant)
- Interface: RS485 (LBus protocol)
- Encrypted data transmission
- Piezo buzzer, 3 LEDs (RGB)
- Tamper contact
- Voltage supply: 12...24 V DC
- Rated power: max. 3 W
- Dimensions (HxBxD) in mm:
- INTUS 700: 100 x 80 x 19
- INTUS 700slim: 130 x 32 x 16
- INTUS 700-Panel: 150 x 150 x 33
- INTUS 700-Steel: 133 x 133 x 36
Video-Clip zum German Innovation Award Winner 2021.
These products may be of interest to you:
Your PCS Contact
Managing Director - Sales
Phone.: +49 89 68004 - 0