INTUS 700 READER

The access readers of the INTUS 700 family feature an elegant design visually aligned with the INTUS 5600 range. The common design element shared by all the readers is a bright blue central ring. Each member of the family has a distinct character: classical with a full-glass front, extra slim for door frame installation, robust and rugged in a zinc die-cast housing, flush inside a front panel, optionally with or without a PIN keypad.

The INTUS 700 RFID access reader appears very elegant with its matt full-glass front. The most striking detail of the reader’s pure version is its bright blue central ring – the design element that distinguishes all the INTUS terminals and readers. Three LEDs at the top edge indicate the reader status: “Reading OK”, “Reading error” etc.

The INTUS 700Touch equipped with a PIN keypad can be operated both via touch and RFID. The PIN keypad is permanently illuminated and clearly visible in the dark. The INTUS 700 access reader keeps up the visual trend of the INTUS 5600 line and convinces in every aspect.

RFID on metal.

The INTUS 700-Panel offers quite a lot for installation in metal environments and front-panel mounting: high-end glass design, a shock-resistant Xensation glass front – 2 mm thick with IK09 impact protection rating – as well as an optional touch surface with illuminated PIN keypad.

Robust and rugged.

The INTUS 700-Steel RFID reader will withstand many an act of vandalism in public places. A rugged zinc die-cast housing combined with 2 mm thick IK09 Xensation glass will hold up even against a rather massive use of force. The device is available with or without a touch surface with illuminated PIN keypad.

Extra slim.

The INTUS 700slim reader is only 32 mm wide – perfect for narrow door frames or jambs. It is optionally available with a robust membrane keyboard. Three LEDs – blue, red and green – signal the status, while the blue ring indicates that the reader is ready.

The PIN keypad is backlit for easy operation in the dark. Optionally the reader is available with a resin-cast connection cable for outdoor use.

 

The INTUS 700 RFID readers are all multi-ISO readers with Mifare and Legic as the standard reading methods. As a contactless proximity identification system, they interface to all PCS Access Control Managers and terminals by PCS’s LBus. INTUS 700 is equipped with a tamper contact and tear-off detector.

The INTUS 700 access readers speak for themselves.

 

The models of the INTUS 700 family

 

  • INTUS 700 and INTUS 700Touch
    Surface-mounted or flush-mounted readers with a full-glass front, optional touch surface with illuminated PIN keypad. Tamper contact and tear-off detector.

  • INTUS 700-Panel and INTUS 700Touch-Panel
    Panel readers with a Xensation glass front, optional touch surface with illuminated PIN keypad. Tamper contact.

  • INTUS 700-Steel and INTUS 700Touch-Steel
    Robust outdoor readers with Xensation glass front and zinc die-cast housing, optional touch surface with illuminated PIN keypad. Tamper contact.

  • INTUS 700slim and INTUS 700slim+PIN
    Narrow-frame readers with membrane front, optional illuminated PIN keypad (membrane). Acceleration sensor as tamper contact.

 

All the readers are available with the RFID reading methods Mifare classic, Mifare DESFire EV1-Emulation, Legic prime and Legic advant.

Downloads